2 in 1 Block Drone Remote Control Handheld Anti Drone 3km Detector 2km Jammer
Product Description
The multi-mission defender integrates detection, early warning, positioning and countermeasure functions, enabling the entire process of drone management with a single device. The device utilizes drone radio spectrum, DJI Drone ID, and RID message parsing technology to detect illegally intruding drones and issue timely warnings.
Furthermore, it employs electromagnetic suppression technology to interfere with and block the drone's remote control link, image transmission link, and navigation signals, causing the drone to return to home, make an emergency landing or hover.
The device comes standard with two replaceable batteries, offering ample battery life and lightweight construction. Its rugged design and portable handle make it suitable for handheld use.
Feature:
2 in 1 Integrated detector and jammer: The equipment adopts an integrated design for detection and jamming, a single device can complete the detection and jamming of drones;
Full-band coverage: Customizable scanning from 300MHz to 6000MHz, covering a wide range of frequencies to meet the diverse drone identification needs of various scenarios;
Accurate identification: It can identify the brand, model, serial number, frequency, azimuth angle, drone and pilot position of mainstream DJI drone models and RID cooperative models;
Rapid response: Multi-channel spectrum scanning technology enables faster detection and early warning;
Multi-model recognition: Can recognize over 800 models, including mainstream drones such as DJI, Autel, Hubson, and Xiaomi, and is compatible with some frequency-hopping drones and FPVs;
Automatic database construction: It has the ability to expand the UAV spectrum feature database, supporting manual or automatic signal acquisition on site and adding it to the feature database;
Amplitude comparison and direction finding: Amplitude comparison and direction finding can be performed using the directional and omnidirectional antennas above the equipment. In a real combat environment, it can determine the quadrant intrusion of the UAV;
Long jamming range: High-power amplifier combined with high-gain directional antenna enables long-range suppression;
Communication jamming: It can suppress the remote control and image transmission signals of drones, cutting off the communication between the remote controller and the drone;
Navigation jamming: Capable of suppressing satellite navigation receivers such as GPS, GLONASS, BeiDou, and Galileo, rendering them unable to navigate;
The interference frequency band can be set: it can transmit interference signals of various frequency bands individually or simultaneously, and the frequency band and bandwidth occupied by the interference source can be set by software;
Frequency domain protection: Each interference channel supports "windowing" within the frequency band, preventing interference with frequencies within the window and effectively avoiding impact on other wireless devices;
Portable: Lightweight and easy to carry, touchscreen operation, easy to use;
Visual operation: The device integrates a touch screen display, providing rich visual content and supporting real-time operation;
Information reporting: Supports customized reporting of device location and on / off status.
Suitable for urban environmental security, major event protection, VIP escort protection, or routine patrols of key areas, etc.
| Model | CQ-D3J2M10-F |
| Operating Mode | Passive radio detection + radio suppression integrated |
| Detection Targets | UAV uplink and downlink CNC links, UAV broadcast message recognition |
| Identification Modes | Spectrum recognition, DJI Drone ID, Remote ID, and various WiFi drones |
| Identify drone types | Consumer drones, industrial drones, FPVs, WiFi-enabled drones, and most non-standard drones |
| Detection | |
| Frequency Range | 300MHz ~ 6000MHz |
| Detection Radius | 1 ~ 3km (varies depending on wireless environment and device model) |
| Detection Angle | 360° horizontal |
| Real-time Scanning Bandwidth | Maximum 480MHz |
| Detection Azimuth Accuracy | 50° |
| Positioning Accuracy | 5m (broadcast message parsing mode) |
| Number of Multiple Targets Detected | ≥40 |
| Detection Response Time | ≤2s |
| Jammer | |
| Operating Frequency Bands | 800MHz ~ 1240MHz, 1360MHz ~ 1800MHz, 2310MHz ~ 2750MHz, 5100MHz ~ 5540MHz, 5540MHz ~ 5980MHz |
| Target Aircraft | Cooperative drones and some racing drones |
| Jamming Distance | 0 ~ 2km (open, unobstructed environment, DJI Mavic 2 Drone (2km)) |
| Interference Response Time | ≤5s |
| Antenna Angle | Horizontal Angle: 75° below 2GHz, 30° above 2GHz; Vertical Angle: 65° below 2GHz, 20° above 2GHz |
| Jamming Type | SDR digital source configurable interference |
| Positioning Function | Built-in BDS positioning module, capable of positioning via GNSS, and supports network-assisted positioning |
| Continuous Working Time | Detection time ≥ 1.5 hours; Jamming time ≥ 30 minutes |
| Boot time | 60s |
| Communication Method | Cellular mobile communication function available |
| Operation Method | 10.1 inch touchscreen operation |
| Power Supply Method | Replaceable lithium battery / external adapter |
| Overall Power Consumption | ≤550W |
| Mean Time Between Failures (MTBF) | 3000h |
| Mean Time To Repair (MTTR) | 1h |
| Operating Temperature | -20ºC ~ +55ºC |
| Storage Temperature | -25ºC ~ +65ºC |
| Dimensions | 318mm x 128mm x 367mm |
| Weight | ≤7kg (excluding power adapter) |