Drone Detection Localization Tracking Jamming Identify Drone Models Multi-Mission Defender C-Uas
Product Description
The fixed multi-mission defender combines drone detection and jamming functions, allowing a single unit to perform both detection and jamming capabilities against drones.
The detection component utilizes spectrum recognition, protocol analysis, and RID analysis technologies to perform real-time analysis of drone radio signals across the entire 300MHz to 6000MHz spectrum, enabling feature extraction and target identification.
The suppression component emits radio signals to jam electromagnetic signals in a specific area, severing the drone's control link, video transmission link, or navigation link, causing the drone to hover, return to base, or make an emergency landing.
The system uses an omnidirectional antenna, achieving 360° all-around target detection and attack. It can be flexibly deployed in fixed positions or on mobile platforms according to needs, adapting to a variety of application scenarios.
Feature:
Integrated d etection and j amming: Integrates detection, localization, tracking, and jamming, completing the entire drone control process with a single device;
Full f requency b and c overage: Customizable scanning from 300MHz to 6000MHz, covering a wide range of frequencies to meet the identification needs of various drones in multiple scenarios;
Accurate i dentification: Can identify DJI series drone models, RID cooperative models, including brand, model, SN number, frequency point, azimuth, and the location of the drone and pilot;
Rapid r esponse: Multi-channel spectrum scanning technology provides faster detection response time for quick warning and detection;
Multi- m odel r ecognition: Can identify over 800 drone models, including mainstream drones from DJI, Autel, Hubsan, Xiaomi, etc., and is compatible with some frequency-hopping and FPV drones;
Automatic d atabase c reation: Features expandable drone spectrum characteristic database capabilities, supporting manual or automatic signal acquisition on-site and adding them to the characteristic database;
Long i nterference r ange: High-power amplifier combined with high-gain custom antenna provides a long suppression range;
Communication i nterference: Can suppress drone remote control and video transmission signals, cutting off communication between the remote controller and the drone;
Navigation i nterference: Capable of suppressing GPS, GLONASS, BSD, Galileo, and other satellite navigation receivers, causing them to lose satellite navigation;
Configurable i nterference f requency b and: Can transmit interference signals in individual or multiple frequency bands simultaneously, and the occupied frequency band and bandwidth of the interference source can be set via software;
Frequency d omain p rotection: Each interference channel supports "windowing" within the frequency band, preventing interference to frequencies within the window, effectively avoiding interference with other wireless devices;
Information r eporting: Supports customized reporting of the device's own location and switch status, and supports remote control;
Environmental a daptability: The device is waterproof and dust-proof.
Suitable for low-altitude surveillance of urban areas, including security monitoring of critical locations such as airports, high-speed rail stations, power plants and transportation hubs.
| Model | CQ-D4J2M40-F |
| Operating Mode | Passive radio detection + integrated wireless jamming |
| Detection Targets | UAV uplink and downlink control links, UAV broadcast message identification |
| Identification Modes | Spectrum analysis, DJI Drone ID, Remote ID, various WiFi drones |
| Identify drone types | Consumer drones, industrial drones, FPVs, WiFi drones and most non-standard drones |
| Detection | |
| Frequency Range | 300MHz ~ 6000MHz |
| Detection Radius | 1 ~ 4km (varies depending on wireless environment and device model) |
| Detection Angle | 360° horizontal |
| Real-time Scanning Bandwidth | Maximum 480MHz |
| Positioning Accuracy | 5m (broadcast message parsing mode) |
| Number of Multiple Targets Detected | ≥40 |
| Detection Response Time | ≤2s |
| Jammer | |
| Operating Frequency Bands | 360MHz ~ 800MHz, 800MHz ~ 1240MHz, 1360MHz ~ 1800MHz, 2310MHz ~ 2750MHz, 5100MHz ~ 5540MHz, 5540MHz ~ 5980MHz |
| Target Aircraft | Commercial drones and some FPV drones |
| Jamming Distance | 0 ~ 2km (open, unobstructed environment, DJI Mavic 2 Drone (2km)) |
| Interference Response Time | ≤5s |
| Antenna Angle | 360° horizontally |
| Jamming Type | SDR digital source configurable interference |
| Positioning Function | Built-in BDS positioning module, positioning via GNSS |
| Continuous Working Time | 7*24h |
| Power-on Startup Time | 60s |
| Communication Method | RJ45 network port communication |
| Operation Method | Remote operation |
| Power Supply | AC220V |
| Overall Power Consumption | ≤1000W |
| Mean Time Between Failures (MTBF) | 3000h |
| Mean Time To Repair (MTTR) | 1h |
| Operating Temperature | -40ºC ~ +55ºC |
| Storage Temperature | -45ºC ~ +65ºC |
| Protection Rating | IP66 |
| Dimensions | 288mm x 462mm x 1095mm (including antenna, handle, connectors) |
| Weight | ≤35kg (excluding power adapter) |