Portable Counter Drone Integrated 300-6000MHz 4km Detection 3km Jammer
Product Description
The portable counter-drone system integrates detection, localization and jamming functions, primarily targeting illegally intruding drones. Using radio frequency spectrum identification, signal analysis, and electromagnetic jamming technologies, and based on an SDR hardware platform, a single device can perform both drone detection and jamming functions.
The device supports omnidirectional detection and early warning, as well as directional direction finding. After determining the target direction, it can implement directional jamming. With its portable design, it is suitable for individual or team deployment and supports a complete operational loop with a single device, while also supporting integration with other systems and platforms for collaborative operations.
Feature:
Integrated d etection and j amming: The device adopts an integrated design for detection and jamming, offering high integration, allowing a single device to complete both drone detection and jamming;
Full f requency b and c overage: Customizable scanning from 300MHz to 6000MHz, covering a wide frequency band to meet the identification needs of various drones in multiple scenarios;
Accurate i dentification: Capable of identifying mainstream DJI series drone models, RID cooperative models, including brand, model, SN number, frequency point, azimuth angle, and the location of the drone and pilot;
Rapid r esponse: Multi-channel spectrum scanning technology provides faster detection and response times, enabling rapid early warning;
Multi- m odel r ecognition: Can identify over 800 drone models, including mainstream drones from DJI, Autel, Hubsan, Xiaomi, etc., and is compatible with some frequency-hopping and FPV drones;
Automatic d atabase c reation: Possesses the capability to expand the drone spectrum characteristic database, supporting manual or automatic signal acquisition on-site and adding them to the characteristic database;
Amplitude c omparison d irection f inding: Uses a directional antenna and an omnidirectional antenna on top of the device for amplitude comparison direction finding, allowing for the determination of the drone's intrusion quadrant in real-world scenarios;
Long i nterference r ange: High-power amplifier combined with a high-gain directional antenna provides a long suppression range;
Communication i nterference: Can suppress drone remote control and video transmission signals, cutting off communication between the remote controller and the drone;
Navigation i nterference: Capable of suppressing satellite navigation receivers such as GPS, GLONASS, BDS, and Galileo, causing them to lose satellite navigation capabilities;
Configurable interference frequency bands: Interference signals in each frequency band can be transmitted individually or simultaneously, and the frequency band and bandwidth occupied by the interference source can be configured via software;
Frequency domain protection: Each interference channel supports "windowing" within the frequency band, preventing interference to frequencies within the window, effectively avoiding interference with other wireless devices;
Mobile and portable: Lightweight and easy to carry, with touchscreen operation for simple use;
Ultra-long battery life: Built-in high-capacity battery for extended operating time, with a standard external low-temperature battery for extended power supply;
Information reporting: Supports customized reporting of the device's own location and switch status;
Environmental adaptability: The equipment is waterproof and dust-proof, and the battery supports low-temperature storage and operation.
Application:
Suitable for major event security, urban environmental and public security protection, or routine patrols in critical areas.
| Model | CQ-D5J3M20-F |
| Operating Mode | Passive radio detection + integrated wireless jamming |
| Detection Targets | UAV uplink and downlink control links, UAV broadcast message identification |
| Identification Modes | Spectrum identification, DJI Drone ID, Remote ID |
| Detection | |
| Frequency Range | 300MHz ~ 6000MHz |
| Detection Radius | 1 ~ 4km (varies depending on wireless environment and aircraft model) |
| Detection Angle | 360° horizontal |
| Real-time Scanning Bandwidth | Maximum 480MHz |
| Detection Azimuth Accuracy | 50° |
| Positioning Accuracy | 5m (broadcast message parsing mode) |
| Number of Multiple Targets Detected | ≥40 |
| Detection Response Time | ≤2s |
| Jammer | |
| Operating Frequency Bands | 360MHz ~ 800MHz, 800MHz ~ 1240MHz, 1360MHz ~ 1800MHz, 2310MHz ~ 2750MHz, 5100MHz ~ 5540MHz, 5540MHz ~ 5980MHz |
| Target Aircraft | Commercial drones and some FPV drones |
| Jamming Distance | 0 ~ 3km (open, unobstructed environment, DJI Mavic 2 Drone (3km)) |
| Interference Response Time | ≤5s |
| Antenna Angle | Horizontal Angle: 75° below 2GHz, 30° above 2GHz; Vertical Angle: 65° below 2GHz, 20° above 2GHz |
| Interference Type | SDR digital source configurable interference |
| Positioning Function | Built-in BDS positioning module, positioning via GNSS |
| Continuous Working Time | External battery: Detection time ≥10h; Jamming time ≥90mins |
| Power-on Startup Time | 60s |
| Communication Method | Cellular mobile communication function available |
| Operation Method | 10.1 inch touchscreen operation |
| Power Supply Method | Built-in lithium battery / external battery / external adapter |
| Overall Power Consumption | ≤650W |
| Mean Time Between Failures (MTBF) | 3000h |
| Mean Time To Repair (MTTR) | 1h |
| Operating Temperature | -40ºC ~ +55ºC |
| Storage Temperature | -45ºC ~ +65ºC |
| Protection Level | IP66 |
| Dimensions | 395mm x 178mm x 248mm |
| Weight | ≤11kg + external battery 6.5kg (excluding power adapter) |