2km 360 Degree Omnidirectional Drone Communication Navigation Jammer
Product Description
The fixed omnidirectional jammer transmits radio signals to disrupt a drone's control, image transmission, or navigation links, causing it to lose control and be forced to hover, land, or be driven away, preventing it from entering the controlled area.
The device features a high-power amplifier and omnidirectional antenna, enabling 360° all-around target engagement. It covers critical communication frequency bands for drones, ensuring effective control over both cooperative and non-cooperative drones.
Depending on operational needs, the equipment can be flexibly deployed at fixed points or mobile platforms, meeting diverse application scenarios around the clock.
Feature:
Extended range: High-power amplifiers paired with high-gain omnidirectional antennas enable long-range signal suppression;
360° jamming: suppresses the flight control signals of small drones and cuts off the communication link between the remote control and the drone;
Communication jamming: Capable of suppressing drone remote control and video transmission signals, thereby cutting off communication between the remote control and the drone;
Navigation jamming: Capable of suppressing satellite navigation receivers (e.g., GPS, GLONASS, BeiDou, Galileo) to disable their navigation function;
Precision strike: Can be coordinated with radio detection equipment to conduct one-on-one precision strikes against detected mainstream drones;
Stable interference: The digital source scheme ensures stable and frequency-stable output signals, enabling prolonged continuous operation;
Selectable interference bands: interference signals can be transmitted individually or simultaneously across all bands;
Remote control: Use remote control to enable or disable suppression.
Application:
Suitable for low-altitude surveillance in urban areas, airports, high-speed railway stations, power parks, transportation hubs, and key event security zones.
| Model | CQ-JJ20-F |
| Operating Frequency Bands | 400MHz, 800MHz, 900MHz, 1.2GHz, 1.4GHz, 1.5GHz, 2.4GHz, 5.8GHz, 5.1GHz to 5.9GHz |
| Targeting Aircraft | Cooperative drones and some stealth aircraft |
| Interference Range | 0 ~ 2km (2km effective range for DJI Mavic2 in open, unobstructed environments) |
| Interference Response Time | ≤5s |
| Antenna Angle | 360° horizontal |
| Channel Combination | Supports using a single channel or any combination of channels |
| Adjustable Channel | Adjustable interference frequency range and power level |
| Interference Type | Digital source interference mode, no frequency offset |
| Location Function | Built-in BDS positioning module supports GNSS-based positioning |
| Continuous Operation Time | 7*24h |
| Boot Time | 30 seconds |
| Communication Method | RJ45 network port |
| Power Supply | AC220V |
| Power Consumption | ≤1200W |
| Mean Time Between Failures (MTBF) | 3000 hours |
| Mean Time To Repair (MTTR) | 1 hour |
| Operating Temperature | -40ºC to +60ºC |
| Storage Temperature | -45ºC to +70ºC |
| Protection Rating | IP65 |
| Dimensions | 461mm x 489mm x 508mm (excluding antenna) |
| Weight | ≤45kg (excluding power adapter) |